LMTV seat options for three kids and two adults

[Ukraine Train]

I'd like to get some seats so my wife and 3 kids can ride in the truck with me. I think I can leave the driver's seat as-is, put some rails on the passenger seat so it can slide forward, remove the center seat, and put a bench across the back. I need to be able to put three booster seats on the back row. Any suggestions on what to use? Maybe a shallow bench from an extended cab pickup? The kids' seats would have to all be on the center and right side because I need my seat to stay all the way back.

 

[Rambling Wreck]

Instead of removing the center seat, how about adding two "jump" seats, one on each side. They could function like in the photo below (from a Chevy S10) but you could affix them so they don't necessarily fold up.

 

[Ukraine Train]

I thought of the jump seat, but I tried shoving one of the booster seats in sideways behind the driver's seat and it won't fit. It might work on the passenger side if I put that seat on rails and move it forward. Might have to drop by the pull-a-part and see what might work.

 

[Rambling Wreck]

Post some pics of the available space when you get a chance. I thought there was more room than that.

 

[Ukraine Train]

Here's the seat area. These kids' seats are the size of la-z-boys these days.

 

[gavland]

I bin trying to figure out the same thing for my self, but I only need 2 boosters.
the s10 seat was my first idea. I have seen seats for sail that move back and forth more than the 1088 do.(wife can be crammed lol)
so a small bench if I can find one, mite fit behind passenger seat.

 

[dilligaf13]

I would stay away from using jump seats that face sideways. The booster seats and three point seat belts are not designed for lateral movement. All the vehicles that used the side facing jump seats (S10 and FJ40 land cruisers) did so under an era of much different safety standards. Would a cut down (shortened for height) bench seat from a M939 or M35 fit back there?

 

[radbad]

5 no way. 4 sure. an 2 person bench seat meant for a jeep will almost fit between the two side seats. That's my plan for the truck - looking at the following:

sides: http://corbeau.com/sport-seat.html
cente: http://corbeau.com/safari.html

 

[VPed]

How about MRAP troop seats? As you can see, the bottoms fold up if needed, great seat belt options.

 

[dilligaf13]

I like the MRAP seat idea, especially the 5 point harnesses.

 

[NDT]

Guys you must be envisioning the rear area of an extended cab pickup. The FMTV cab barely has enough room behind the seat for a MT-6352 Sincgars mount longways.