• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LMTV wheel CTIS on a 5 Ton

charlesmann

Well-known member
700
713
93
Location
Temple, Tx
I can answer yes to running wheels, but not leaving the ctis system installed and plumbing into the truck.
i would venture to say yes, by swapping out the banjo fitting inlet hose out for a hose that would work with the a2 plumbing from the hub.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,130
9,405
113
Location
Mason, TN
A2s use a metal pipe with an O ring where it goes into the drive flange. Why I suggested tapping it and using a hose to connect that tap port with a JIC fitting to the ctis valve the lmtv wheel uses.

They are 55psi valves
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks