Load Terminal Box Wrench P/N for MEP-002a/-003a ?

[Chainbreaker]

Can someone who has one, please verify the P/N for the non-conductive wrench that fits the load terminals for MEP-002a/-003a? I've looked in manuals and the accessories STICKY above with no luck. I earlier purchased a Box Wrench (PN: 5120-00-138-3790 PN: CTM-282) off eBay that was listed as fitting MEP-002a, among other MEP gensets, and it was much too large! I don't want to make that mistake again.

 

[Guyfang]

Load terminal from the MEP-002A: 5940-00-958-1214. Part numbers: DC93M6F-8-RPC and 13208E5820-1
Load terminal from the MEP-003A: 5940-01-009-4763. Part numbers: 69-692-1 and 332-1290

I looked up the -1214 NSN. it appears that the -1214 NSN is the same as 5940-01-009-4763, (same as the MEP-003A) and also the NSN 5940-01-141-3671, 5940-00-177-2668, 5940-00-237-2702
It also shows all the below listed PART NUMBERS.

PART NUMBER
13208E5820		A	D	9
13208E5820-1		A	7	2
2803005-0-153		A	5	2
2803005-0-153		H	5	9
30554-69-692-1		A	5	2
69-692		A	D	9
69-692-1		A	7	2
961-0081		H	5	9
DG3M6F-S-RPC		A	3	2
JHP112-53		H	5	9
S-38615-G5		A	5	9
S44706

Caricteristics

	TERMINAL LENGTH	1.500 INCHES
	OVERALL HEIGHT	3.938 INCHES
	OVERALL DIAMETER	1.375 INCHES
	THRU-HOLE DIAMETER	0.030 INCHES
	LARGEST DIAMETER	1.188 INCHES SINGLE END
	TURRET MINOR DIAMETER	0.875 INCHES SINGLE END
	ELECTRICAL INSULATION FEATURE	UNINSULATED
	MOUNTING METHOD STYLE	STUD
	THREAD LENGTH	0.040 INCHES
	BASIC SHAPE STYLE	NONTUBULAR, ROUND
	MOUNTING THREAD SERIES	UNC
	CONDUCTOR ACCOMMODATION TYPE	SINGLE TURRET SINGLE END
	MATERIAL	COPPER ALLOY CONDUCTOR ACCOMMODATION
	MATERIAL	COPPER ALLOY MOUNTING FACILITY

Then I made the mistake of looking up part numbers. It gets worse. So I went to the MEP-802A parts manual. The load terminal NSN is: 5940-00-958-1214. The same as the 002A and 003A. So, the Non conducting wrench, listed in TM 9-6115-641-24P, 5 KW, MEP-802A, page, (PDF page number) 127, Item #6, Wrench, Box, NSN: 5120-01-373-8976, part number: 88-21146, will fit the MEP-002A and MEP-003A.

So, after a real goat screw, it looks like someone lied to you. 5120-00-138-3790 goes to:

END ITEM IDENTIFICATION

DOD 15KW AND 30KW DIESEL GENERATOR SETS

So if you paid a bunch of money for the darn thing, I think you need to give them a call. Maybe talk about getting your money back.

 

[Chainbreaker]

Thank you Guy! Now I know the one(s) that will fit my -002a. Your knowledge, experience and resourcefulness is a treasure to the Steel Soldiers forum and its members!

Yep, the eBayer that sold me the wrong wrench still has some listed as working on -002a. I am going to message him to remove the -002a so others don't make the same mistake I did. I would send it back to him but not worth the time and shipping cost. I now have a nice non-conductive paper weight with that one.

Anyway, off to purchase the correct one now that you cleared it up!

 

[Chainbreaker]

Please incorporate Guys response above to the accessories sticky.