brompton
New member
- 5
- 0
- 0
- Location
- Houston, TX
Looking for good running/rebuilt Cummins NHC 250 Diesel Engine for my M818
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Looking for a good running/rebuilt Cummins NHC 250 Diesel
- Thread starter brompton
- Start date
mlwats1@hotmail.com
New member
- 199
- 2
- 0
- Location
- carthage missouri
RE: Looking for a good running/rebuilt Cummins NHC 250 Diese
jim walace nevada mo has one in a engine can 4176671007
jim walace nevada mo has one in a engine can 4176671007
- 12,195
- 319
- 0
- Location
- gainesville, ga.
RE: Looking for a good running/rebuilt Cummins NHC 250 Diese
i would get another 809 series, pull the motor , then sell the rest, might make some money and get a motor free
i would get another 809 series, pull the motor , then sell the rest, might make some money and get a motor free
supermechanic
Member
- 274
- 1
- 18
- Location
- poconos, pa
RE: Looking for a good running/rebuilt Cummins NHC 250 Diese
Ditto above.
I bought a 'in the can' motor from Vermont Commercial Salvage, for my m51, I paid more for the motor than I paid for the whole truck.
A 290 cummins is a common engine at truck boneyards, sometimes they can be had complete for as little as $500.
they have the oil cooled pistons, and can be turned up for more HP, even if you decide to strip off the turbo and intercooler to make it look like a 250.
Ditto above.
I bought a 'in the can' motor from Vermont Commercial Salvage, for my m51, I paid more for the motor than I paid for the whole truck.
A 290 cummins is a common engine at truck boneyards, sometimes they can be had complete for as little as $500.
they have the oil cooled pistons, and can be turned up for more HP, even if you decide to strip off the turbo and intercooler to make it look like a 250.