Looking for a Wrecker

[jfnemt1ff1]

Ok here goes I am looking for a new project and was looking into getting a 5 ton,What do you guys think about the diffrent modles.I even know were a 21/2 ton wrecker is. So post up and let the fun begain.
John

 

[maddawg308]

M816 is probably the best, but the older M543 and M62s are no slouch either. There is a nice one for sale through Eastern Equipment in PA, the truck is located in NY, has some options that are nice, for $11,000.

 

[Recovry4x4]

Considering your penchant for restorations and the need to keep busy, I might opt for the deuce wrecker. Far and away a more time involved project, especially if you convert it to multifuel. Have you seen this deuce wrecker? Maybe you could get lucky and have found the ultra rare M60. Other than that, wreckerman knows where there is a Mack powered M62 in AL which in my opinion would be the ultimate military wrecker.

 

[jfnemt1ff1]

Keep the info coming and any pics would great.
John

 

[area52]

5 ton - M246(gas, multi or Mack powered) longer reach, fifth wheel plate - I like this one!!
M62 not as long reach no fifth wheel plate( did these has a winch on the back?)
M543 mostly mullit fuel powered yes? with front and rear winches and crane
M816 just like the 543 with a cummins engine
M819 like the 246 with a cummins engine
then you have the 900 series which I don't have a clue about

2 1/2 ton series - M108 and M60 - ask Kenny about the M108.

thats all I know off of the top of my head.

I love wreckers!!!!!

 

[gimpyrobb]

Yup, the m62 has a 45,000lb winch on the back. If I had my choise, a 246 or 819 would be the ultimate.

 

[67Beast]

Hey John, I know were an older gasser 5 ton wrecker is for sale here in Michigan. Last I heard he wanted $4500 for it. It is need of some basic resto work, but was a very solid platform to start from. We used it when I bought my deuce bed from him to load it on my trailer. seamed to run OK. Here is a pic of it.

 

[timntrucks]

M816 in baton rouge louisiana, 6000.00 runs but crane needs some work, it wont rotate. just stuck he says, no pics but looks good Tim

 

[eddiec]

the 543 that i am picking up on the 21st of july is still a gasser.

 

[Crash_AF]

If you decide that you aren't going to buy that 2 1/2 ton wrecker, could you please PM me the contact info? I'm looking for a M60.

Later,
Joe

 

[maddawg308]

I'd get that yellow wrecker above, John. Close to you and the price is right!

 

[jfnemt1ff1]

I have been looking at that truck,M819 Does anyone know if it has a rear wintch and does the boom turn 360 deg.I have never seen one up close good truck or not.
John

 

[steelsoldiers]

Only problem is:

Sorry, no title for this truck - just to damn difficult locally.

 

[jfnemt1ff1]

Thats ok in Michigan all I need is a bill of sell,That one nice thing about Mi.

 

[M1075]

I have been looking at that truck,M819 Does anyone know if it has a rear wintch and does the boom turn 360 deg.I have never seen one up close good truck or not.
John

No rear winch on the M819. It has the 5th wheel plate instead. Unless of course you consider the crane hoist a winch.

Full rotation available on the boom. See pics posted recently of fellow member installing front winch using the crane to lift it over the cab.

 

[gimpyrobb]

John, if you need a wrecker with a rear winch, buy that one and I'll trade you.

 

[jfnemt1ff1]

John, if you need a wrecker with a rear winch, buy that one and I'll trade you.

How about the M725 for the wrecker you have
John

 

[gimpyrobb]

Sorry to say yours is too nice. I would be afraid to drive it and I don't have anywhere in doors to store it. I have everything that I would ever need, but would love a 246/819.

 

[gt1009]

Why not just go all out and buy an m911?

 

[Recovry4x4]

Can't lift much with a 911.