looking for info on who is selling parts for my 1009

[wiccantoy]

Ok keep searching for someone that is supposed to be selling new gp relay cards. Cant find anything on here or ebay. Anyone have any idea where i should be looking?

 

[mudman]

CUCVElectric.com will have everything you will need.

 

[mudman]

Also You will have be be a "Paid" member, but the classified's here are loaded with guys with parts, or know where to get them.

 

[ryan77]

read this
http://www.steelsoldiers.com/cucv/67581-1st-sarge-glow-plug-controller.html?highlight=glow+plug+card

 

[wiccantoy]

MUDMAN AND RYAN. Thank you very much. We shall see if this is my fix for my problems. And to answer your post I am a paid member on here.

 

[AceHigh]

Also Karl (Antennaclimber) has them with some upgrades. Great product and service.

http://www.steelsoldiers.com/parts-sale/81266-cucv-glow-plug-module.html#post1034996

 

[WillWagner]

on the above

 

[Warthog]

Also You will have be be a "Paid" member, but the classified's here are loaded with guys with parts, or know where to get them.

Just a clarifcation.....

You do not need to be a paid member to look at the ads or buy anything.

You only need to be a Paid member to post an item for sale.

 

[Warthog]

MUDMAN AND RYAN. Thank you very much. We shall see if this is my fix for my problems. And to answer your post I am a paid member on here.

Make sure you follow the TM 9-2320-289-20 electrical troubleshooting Section 2-15, page 2-63(???) for the GP system before you install a new card. Don't want you frying a new card.

 

[wiccantoy]

Warthog thank you for the concern. I will make sure to check that out.

 

[CARNAC]

Some guy named CARNAC has them also.

 

[wiccantoy]

Well the parts are on my truck. Did it all today after lunch. All works. Just still don't have the gage in the green. Its just below it. Just something else to trace. Enclosed is a picture of the old relay under the hood. Got it from napa. I looked at the one on the passenger side for my plow. And they are the same. But o well it was probably what killed the card.

 

[K9Vic]

Before you damage your new GP card, you need to make sure you are using the correct relay and not another incorrect Ford relay. I would read through this thread and pay extra attention to the last page from my post. If the replacement relay has the "I" & "S" next to the small terminals, it will likely fail your GP card again as it is grounded through one of those small terminals.

http://www.steelsoldiers.com/cucv/78979-glow-plug-relay-question-4.html

Make sure you only use the ST85, S603 or those ones from eBay that are like $9.00 each.

 

[Recovry4x4]

Some guy named CARNAC has them also.

This CARNAC guy needs to do a better job of cataloging his wares. Who would have know he had them?

 

[emmado22]

Antennaclimber is a good guy with an excellent product.

 

[CycleJay]

Hello,

cucvelectric.com is where I got mine.

Try them..

Good night

 

[wiccantoy]

I replaced the gp card and the relay from cucvelectric.com. the relay is the chrome barol that they recommend for the cucv. Im thinking it may be another relay somewhere on the truck.

 

[wiccantoy]

Both alternators are up to par.

 

[wiccantoy]

I did get a paper showing where all wires went. And the 2 small wires were on the wrong posts.

 

[mr.travo]

Also Karl (Antennaclimber) has them with some upgrades. Great product and service.

+1 on that one!