looking for parts for a transfer case

[Big Mike's Motor Pool]

i need the output shaft from an NP 200 from a kaiser or M37. the brake output and the drive shaft output should be the same. i need one with 35 teeth on the gear not 32. let me know what you have thanks

 

[Barrman]

I assume you mean the internal gear has 35 teeth? The yoke end has 10 splines on mine.

 

[Big Mike's Motor Pool]

yea, the internal gear has 35 teeth, its a part of the shaft when you take it out. there is one at a local junkyard. its still in the case, but the bearing retainer is missing. i crawl under it and all i had to do was grab it and pull it out. i go up to the front with it and the junkyard guy flips out and makes me put it back cause he said i took his case all apart with the tools i didnt have. then he says he wants $400 for the case thats missing parts. i hope it rusts up solid and he only gets $3 for it when scrap falls back to minimal money

 

[Barrman]

I know exactly what you mean about the junk yard guy. I don't have a spare at this time. I might know where a few are. All in Texas though which wouldn't make it worth your while. I will look around.

 

[Big Mike's Motor Pool]

thanks, even if i gotta get it shipped in it will save me