• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Looking for some information Please/ M1078 - M1083

Lugnuts

Active member
Steel Soldiers Supporter
329
243
43
Location
Myakka City, FL
Question one - I was needing starter numbers, my tag is missing/ Caterpillar engine/ 24 volt/ I presume this starter is a Prestolite, I was wondering if I can get Delco instead/ Am I pressing to ask for maybe a gear reduction unit instead of direct drive/ The truck is a working brush truck and I am not able to remove it from service so I would like to be able to get one to minimize down time.
Question two/ The driver side door glass needs replacing. Need help in either buying replacement or is their a number to be able to get a replacement glass itself?

Assistance will be greatly appreciated! Lugnuts
 

NDT

Well-known member
Steel Soldiers Supporter
10,498
6,631
113
Location
Camp Wood/LC, TX
I’m a little confused, if the truck is working, why do you need a starter? FMTVs have lots of gremlins but the starter is not one of them.
On the window, that can be problematic. Check ebay and call around to all the dealers such as Eastern.
 

Lugnuts

Active member
Steel Soldiers Supporter
329
243
43
Location
Myakka City, FL
I’m a little confused, if the truck is working, why do you need a starter? FMTVs have lots of gremlins but the starter is not one of them.
On the window, that can be problematic. Check ebay and call around to all the dealers such as Eastern.
 

Lugnuts

Active member
Steel Soldiers Supporter
329
243
43
Location
Myakka City, FL
The starter works satisfactorily to get it started when cold, when hot the amp draw goes high and drags. The problem is not in the cables or connections. I hope this answers your question.
 

snowtrac nome

Well-known member
1,674
139
63
Location
western alaska
I would have to dig up the box for the part number but yes you can use a cat starter I have one in mine the cat starter is a delco and built much better than the prestoite mine bent thr clutch fork on the presto light it was a light little stamping the delco one is cast and much more robust
 

Lugnuts

Active member
Steel Soldiers Supporter
329
243
43
Location
Myakka City, FL
I would have to dig up the box for the part number but yes you can use a cat starter I have one in mine the cat starter is a delco and built much better than the prestoite mine bent thr clutch fork on the presto light it was a light little stamping the delco one is cast and much more robust
Thank you for the information. I'll see what Cat has to say. Lugnuts
 

coachgeo

Well-known member
5,150
3,466
113
Location
North of Cincy OH
Thank you. Spare parts for these vehicles seem to be difficult to get a hold of. Lugnuts
not really.... just got to learn a new set of parts houses..... any large commercial truck like these use a whole different network of parts places than what the average person is use to using.
 

m-35tom

Well-known member
Supporting Vendor
3,022
223
63
Location
eldersburg maryland
aftermarket cat starter will fit but is light duty compared to the mil one, but then they are only $200 new instead of $1700 but are not waterproof.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks