Love my CUCV and so does everyone else.

[Swamp Rooster]

Hello everyone.
I have been running my CUCV for about a year now for work and I love it . I log with horse so I toe a lot of weight all the time . My horses are about a ton a piece and my gear and trailer in there..well it is a lot . It can go about any place even pulling the trailer and if it can not the horse can pull it out .. I drive at top speed of 55 and do not go faster even if I can . The locker rear end was a little adjustment this winter but not bad really.. The best part is for business everybody notices my truck and it is something they remember . One of the best buys I ever made for sure..
One question I have is what kind do I have ? is it a 1031 or a 1028...? I am not sure . As you can see in the pics the bed has been chopped of some what.. https://scontent-ord.xx.fbcdn.net/h...=776b9fb4f82a1e5e3c6b75c8488ede39&oe=55A44FD9

https://scontent-ord.xx.fbcdn.net/h...=d3ec9210a685893edf7eebcea7e04b2a&oe=55E47055 I have more pics but can not get to them right now .. I will try later .. Swamp Rooster

​

 

[evldoer]

On the vin number 4th character is the GVW indicator. It's an "H" on a M1028/A1/A2/A3, M1031, M1010, a "G" on an M1008/A1, and an "E" on an M1009

Your truck looks good with that box on it. Where around Hayward are you at? Keep an eye out for my tan cucv. I stay around Loretta on the weekends.

 

[Warthog]

Also on the door data plate it should have a NSN number. With that we can tell you what it is

 

[NDT]

Do you guys see what I do? It's a M1031 SECM body cut down looks like 30". That had to be a lot of work.

 

[Swamp Rooster]

On the vin number 4th character is the GVW indicator. It's an "H" on a M1028/A1/A2/A3, M1031, M1010, a "G" on an M1008/A1, and an "E" on an M1009

Your truck looks good with that box on it. Where around Hayward are you at? Keep an eye out for my tan cucv. I stay around Loretta on the weekends.

Hey man , I am around Springbrook area . That is between Hayward and Trego . I will keep an eye out for your for sure .. I am always around that area working and a lot of people ask me about my truck . Swamp Rooster .

 

[Swamp Rooster]

I will look at my vin and see. I does have the PTO but the gear is gone and has a plate bed where the belt must have ran. The box has been chopped to make it shorter ..Swamp Rooster.

 

[Recovry4x4]

Odds are it's an M1031. So far everything points to that with the body chopped off.

 

[wilogger]

Hi Swamp rooster, I just commented on your nice truck on the Airedale board, i didn't know you were on here to, anyway again nice truck.

 

[T. Highway]

Swamp Rooster,

Nice looking truck, how about a picture of the workhorses?

Bert

 

[GM72K10]

If the 3rd digit on the vin is a "B" its an M1031. Nice Rig.

 

[Swamp Rooster]

HA HA , cool .. more than one of the same interest ... You got Airedales to ?

 

[Swamp Rooster]

And thanks for the info guy ,I am about positive it is a 1031.. Swamp Rooster .

 

[Swamp Rooster]

I will get some pics and video up .. Here is one Video that PBS did on me a couple winters ago.. http://video.wpt.org/video/2365334813/ I will find some more of my team and my horse drawn forwader ..Swamp Rooster ..

 

[GM72K10]

A Schnauzer only lol

 

[wilogger]

Oh ya i have Airedales and that Heideterrier (kind of) also. Anyway do you have the welder/generator set up in your 1031?

 

[wilogger]

Plus i'm a Wisconsin logger, we do seem to have the same interests lol.

 

[Swamp Rooster]

Plus i'm a Wisconsin logger, we do seem to have the same interests lol.

Man we need to talk. I have been in and out of Jagd terriers , have had some good Airedales , have one left and may be interested in a Heidi .. This is great man. That video I posted was from a couple winters ago and I was not running this truck at that point but now I got a this one and a C70 1982.. I am also going to paint that one the same green as my 1031. Swamp Rooster .

 

[Swamp Rooster]

Oh ya i have Airedales and that Heideterrier (kind of) also. Anyway do you have the welder/generator set up in your 1031?

And no I do not have the welder or any of that stuff ...wish that I did. Swamp Rooster

 

[T. Highway]

Excellent video, thanks for sharing. I look forward to seeing more.

Bert

 

[Recovry4x4]

I agree, that video was great. I like machines but what you have, that's real horsepower.