goat whisperer
New member
- 165
- 1
- 0
- Location
- Bremen, Germany
The 3-53 of my goat doesn´t reach normal operating temperature...
If I push em to the limit the temperature will go up to 140° and it should be 180° - 200°.
So I opened the thermostat housing and i found the thermostat and another part.
I´m not shure if it belongs to the thermostat or if it is an old part that has been lost during a repair?
The part might belong to the thermostat. In this case it will close an channel / drain in the back of the thermostat housing when the thermostat opens. In this case the hub / stroke will be max. 0.3 inch until the plate closes the drain and the thermostat stops to open... is that enough?
On the other hand the thermostat that is showing in the manual doesn´t look like my thermostat AND the small plate...
Does anyone have pictures of the Goat thermostat? Does anyone know if these both parts belong together?
If I push em to the limit the temperature will go up to 140° and it should be 180° - 200°.
So I opened the thermostat housing and i found the thermostat and another part.
I´m not shure if it belongs to the thermostat or if it is an old part that has been lost during a repair?
The part might belong to the thermostat. In this case it will close an channel / drain in the back of the thermostat housing when the thermostat opens. In this case the hub / stroke will be max. 0.3 inch until the plate closes the drain and the thermostat stops to open... is that enough?
On the other hand the thermostat that is showing in the manual doesn´t look like my thermostat AND the small plate...
Does anyone have pictures of the Goat thermostat? Does anyone know if these both parts belong together?
Attachments
-
65.7 KB Views: 13
-
48.3 KB Views: 12
-
51.1 KB Views: 12
-
56 KB Views: 14
-
63.3 KB Views: 14
-
51.2 KB Views: 19
Last edited: