- 2,039
- 221
- 63
- Location
- North West Arkansas
Are the lug nuts on a M101 and M105 interchangeable?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Lug Nuts - M101 and M105 The Same
- Thread starter rumplecat
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Nope, 105 and deuce are.
- 2,102
- 30
- 38
- Location
- Delta Junction, Alaska
The early ones were!
CGarbee
Well-known member
- 2,473
- 562
- 113
- Location
- Raleigh, NC
Lug nuts on a M101 or M101A1 (both with the Budd 6.50Hx16 wheels with the GY-LTS lockring) are. Same lugnut that you find on a M105, M35, M37, etc. The later model M101A2 and M101A3's have different (smaller) lugnuts since they match up with Chevy's and HMMWV's respectively.
Don't forget that you have the same left/right lug nut situation that you have with the trucks, left hand thread on the left hand hubs for a M101/M101A1.
Don't forget that you have the same left/right lug nut situation that you have with the trucks, left hand thread on the left hand hubs for a M101/M101A1.
- 2,039
- 221
- 63
- Location
- North West Arkansas
Thanks guys, there was a spare M37 type wheel on one of the Pioneer Tool Trailers I won down at Camp Shelby, now maybe I can move that M101 trailer that has been sitting on one wheel in OK for the last three years!!!!
LEEBS
New member
- 10
- 5
- 3
- Location
- York, Pennsylvania
What size lug nuts are on '60s M101's? I tried 1/2" and they won't thread on!
- 10,457
- 6,529
- 113
- Location
- Camp Wood/LC, TX
There are lefts and rights!
LEEBS
New member
- 10
- 5
- 3
- Location
- York, Pennsylvania
I know!
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
Larger than that
3/4-16 maybe
3/4-16 maybe
- 6,986
- 2,522
- 113
- Location
- Montevideo/Uruguay
Yes, 3/4"-16 tpi