- 3,022
- 223
- 63
- Location
- eldersburg maryland
does anyone know the m number of the 2 1/2 ton trucks that were made for norway with locking axles and other upgrades?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
m number wanted
- Thread starter m-35tom
- Start date
papercu
Active member
- 2,930
- 31
- 38
- Location
- Baxley, Ga.
trucks
From google:
M621 Truck, cargo, export to Norway, 2 1/2-ton, 6 X 6, 11:00 X 20
M622 Truck, fuel tank, export to Norway, engine flame heater kit, 6 X 6
M623 Truck, van, export to Norway, compressed air diff-lock on 3 axles
M624 Truck, dump, export to Norway, (details apply to all 4 trucks)
From google:
M621 Truck, cargo, export to Norway, 2 1/2-ton, 6 X 6, 11:00 X 20
M622 Truck, fuel tank, export to Norway, engine flame heater kit, 6 X 6
M623 Truck, van, export to Norway, compressed air diff-lock on 3 axles
M624 Truck, dump, export to Norway, (details apply to all 4 trucks)
- 34,012
- 1,809
- 113
- Location
- GA Mountains
RE: trucks
Tom, do you still have axles? Folks, Let me intorduce M-35tom. He's non other than the builder of the Millenium Reo. Glad to have you aboard Tom.
Tom, do you still have axles? Folks, Let me intorduce M-35tom. He's non other than the builder of the Millenium Reo. Glad to have you aboard Tom.
- 8,539
- 2,761
- 113
- Location
- Monrovia, Ca.
RE: trucks
Millenium Reo? Whuuu?
Millenium Reo? Whuuu?
- 34,012
- 1,809
- 113
- Location
- GA Mountains
RE: trucks
CAT powered deuce built from 2 frame rails, Nice!
CAT powered deuce built from 2 frame rails, Nice!
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
RE: trucks
Hey Tom, welcome to the steelsoldiers!
If I may ask, do you still have any leftovers from your XM757 project?
Hey Tom, welcome to the steelsoldiers!
If I may ask, do you still have any leftovers from your XM757 project?
TacticalTruck
Active member
- 928
- 48
- 28
- Location
- Va Piedmont
RE: trucks
When I spoke w/ Tom at Aberdeen, he was using the last three axles for his next build.
Jeff
When I spoke w/ Tom at Aberdeen, he was using the last three axles for his next build.
Jeff
- 3,022
- 223
- 63
- Location
- eldersburg maryland
millenium reo
thanks kenny and jeff...
i would love to find a blank data plate for a m-621. the current project is almost done, 3 air locking axles, hyd power steering, 12" wheels with 14.5r20, dual air over hyd brakes, air assist hyd clutch, different instrument panel, hemmit seats, and maybe some more later like a/c.
tom
thanks kenny and jeff...
i would love to find a blank data plate for a m-621. the current project is almost done, 3 air locking axles, hyd power steering, 12" wheels with 14.5r20, dual air over hyd brakes, air assist hyd clutch, different instrument panel, hemmit seats, and maybe some more later like a/c.
tom
- 34,012
- 1,809
- 113
- Location
- GA Mountains
Tom, you mean like this one? Trade ya for some HEMTT seats!
