jelease
New member
- 5
- 0
- 0
- Location
- new windsor/md
I am new to the MV world. I went to hook up my lights for my tag I dont have any tail lights. I have brake lights and blinkers but that is all. could anyone offer any help on this thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1008 electrical problems
- Thread starter jelease
- Start date
Welcome to Steelsoldiers.
This post should be in the CUCV forum.
Check the fuse for the Courtesy Lamp. It controls both the tail lights and the courtsey lamp.
Second from the left and forth row from the bottom. The row with 4 fuses across.
This post should be in the CUCV forum.
Check the fuse for the Courtesy Lamp. It controls both the tail lights and the courtsey lamp.
Second from the left and forth row from the bottom. The row with 4 fuses across.
stampy
Active member
- 1,321
- 22
- 38
- Location
- Henderson. NC
Clean (scrape the silver blades on all your fuses, I used my knife) then dielectric grease them and put them back in. Clean and grease the bulbs too . Dielectric grease can be bought at any auto parts store. Also refer to the last line on Warthogs tag from Ralbert....it is a CUCV truism.