• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1009 blowby

Paycheck

New member
102
0
0
Location
Buckeye,AZ
Have minor blow by is this anything to worry about or should I look into rebuilding the 6.2 thanks


Sent from my iPhone using Tapatalk
 

Paycheck

New member
102
0
0
Location
Buckeye,AZ
Blow by if I could find the answer I wouldn't be posting this !

Reason I wrote that in subject line is because someone reported me to admin and deleted my post ! My question is simple I own a M1009 I have blowby minimal I am new to the diesel engine I would like to know if this is normal or do I need to look into rebuilding the motor thank you any issues with this question please man up and message me instead of crying to admin because you have nothing els better to do with your time! It's a valid question looking for an honest answer thank you.


Sent from my iPhone using Tapatalk
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Our rules are simple too, post once in the appropriate forum.

You have started 3 new threads so far. Stop and figure out how to use the site, do not post another duplicate thread.

Use the website help forum if you need help learning how to use the site.

btw, nobody cried to admin, a moderator simply noticed your threads and did what we do.
 
Last edited:

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,290
1,776
113
Location
Edmond, Oklahoma
Yea
He already sent me a PM calling me names.

In the time he's spent on all this he could have found out the answer.
.......and to 20 more questions.
 

MuleMac01

Military vehicle collector
Steel Soldiers Supporter
890
158
43
Location
Las Vegas Nevada
Yes a little oil mist is normal but you should've use the search function on the website first. And and FYI don't piss off the admin's
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Yea
He already sent me a PM calling me names.

In the time he's spent on all this he could have found out the answer.
.......and to 20 more questions.

Please forward the PM, we have rules...
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
CDR valve clean?
 

Paycheck

New member
102
0
0
Location
Buckeye,AZ
Dog head when I post a thread it will I can not see it is it an issue with my browser I don't use forums a lot thanks


Sent from my iPhone using Tapatalk
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Go to a computer and look at what a great site we have.

Also, download the technical manuals, they are wonderful resources.

CDR vale helps control blowby. Looks like a tuna can on the passenger side above the intake manifold runners.

Clean it with liquid spray cleaner of your choice.

Blowby is almost always gonna happen to some extent.
 

Paycheck

New member
102
0
0
Location
Buckeye,AZ
Thank you I'll try that when I get home I drive a truck over the road out for a month at a time no computer access on the road


Sent from my iPhone using Tapatalk
 

MuleMac01

Military vehicle collector
Steel Soldiers Supporter
890
158
43
Location
Las Vegas Nevada
The CD-R valve looks like this IMG_0537.JPG pasanger side next to the air cleaner.. clean it like doghead said then spray WD-40 inside it to lube it up again but it should never be more then oil mist if it is then your engine is getting worn out.
 

cucvrus

Well-known member
11,473
10,434
113
Location
Jonestown Pennsylvania
One quick question. Is the oil vapor/mist only present at idle? If so that is pretty much the norm. If you have the oil cap off at idle and you just step up the idle a bit. The norm is it the vapor/mist/smoke goes away. Check that out and see if it holds true. I know when I change oil I can smell the clean oil vapors coming from the breather cap. Good Luck. Report back.
 

Paycheck

New member
102
0
0
Location
Buckeye,AZ
One quick question. Is the oil vapor/mist only present at idle? If so that is pretty much the norm. If you have the oil cap off at idle and you just step up the idle a bit. The norm is it the vapor/mist/smoke goes away. Check that out and see if it holds true. I know when I change oil I can smell the clean oil vapors coming from the breather cap. Good Luck. Report back.
It's in the shop getting transmission and transfer case rebuilt previous owner abused it I know it mists at full tube on idle


Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks