M1009 front and rear spring bushings part numbers

[Kacykl]

I'm looking for the energy suspension part numbers for the front and rear spring and shackle Poly bushings.

Thanks in advance.

 

[Barrman]

Off Road Design might be able to answer your question and maybe have a better option. I put some of their gray bushings with the greaseable bolts in my front suspension. Very firm with no noises.

 

[Barrman]

Here is the link:

Complete Front and Rear Spring Bushing Kit

Get all the bushings for your suspension in one convenient place! All of these kits use our super strong Kevlar infused polyurethane to give your truck the ultimate in ride and longevity!

www.offroaddesign.com

 

[adf5565]

I put new springs so I only needed to change the shackle bushing so here is that at least. I believe the spring bushings themselves were both the same size but can’t recall what exactly that was. But since you’re doing all of them i would suggest just getting the set from ORD.

 

[adf5565]

Disregard that post, that part# is for an M1008 not M1009.

 

[cucvrus]

Disregard that post, that part# is for an M1008 not M1009.

I think they are the same. I changed many of them and I always used Energy Suspension.

 

[CARC686]

I've got 3.2105R for Energy Suspension front. R is red. G is black. I wanted the visual indicator of what I had and hadn't done for later reference, hence the red. Somewhere I read the M1009 was all K30 underneath. I needed a grinder and a lathe to install the K30 shocks I had ordered, so I get the feeling that's not true. Hopefully, I do not have an incorrect bushing kit as well. According to CUCV Cliff on YouTube, the metal center of the bushings is too small for the CUCV and someone at Energy Suspension was sending him correct replacements. No update on that situation for awhile, though.