BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
I am trying to install a M1009 rear bumper on my 1981 Suburban. Does anyone have pictures for installation purposes.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1009 rear bumper for Suburban
- Thread starter BUGOUT2
- Start date
90Jimmy
Member
- 233
- 5
- 18
- Location
- Southern Illinois
The TM has an awesome exploded view that helped me with installing the CUCV bumpers on my Jimmy.
- 142
- 35
- 28
- Location
- Los Angeles, CA
My truck is currently a cab & chassis. What would you like photos of? How it bolts up generally?
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
TM...?
- 142
- 35
- 28
- Location
- Los Angeles, CA
TM = Tech Manual
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
That's what I thought... just checked it out. It's clear now.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Got it installed today thanks.
ballencd
Active member
- 164
- 57
- 28
- Location
- Columbus, NC
Pictures? I have a set of front and rear M1009 bumpers and brush guard that I am wanting to install on my 91 V1500 suburban.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Do you have all the brackets?
I used the factory bumper bracket that's at the end of the frame. I drilled holes that matched the M1009 bracket. By not removing the factory brackets you can line up the new bumper.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
View from inside the frame
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
I dont have the cross bar so I will make one.
Then I will reattach my factory trailer hitch
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Front bumper and grill gaurd. I cut and modified it to follow the hood angle.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
I will post more pictures if you need them
ballencd
Active member
- 164
- 57
- 28
- Location
- Columbus, NC
That looks real good! Thanks for the pictures. I'm hoping to get mine on this summer but time will tell.
cucvrus
Well-known member
- 11,290
- 9,683
- 113
- Location
- Jonestown Pennsylvania
What? That is the same shape and sheet metal a CUCV has. And please don't hook anything on that pintle hook you attached. That is very weak even with a crossbar. honestly The M1009 Pintle was weak from day 1. I ripped a few right off the trucks with a Bubba Rope. Good Luck,
Barrman
Well-known member
- 5,176
- 1,604
- 113
- Location
- Giddings, Texas
What exactly is a “Bubba rope?”
Very good point about the M1009 Pintle being weak. Many post and threads already about that.
Very good point about the M1009 Pintle being weak. Many post and threads already about that.