- 115
- 119
- 43
- Location
- Los Angeles/CA
The starter cable on my 1009 was routed from the 24v bus bar under the frame and to the starter when I got it. This seems unusual and I'd like to return it to the factory routing, but haven't found a diagram in the TM showing what that would be.
Can anyone share a description or photo of how the starter positive cable should be routed?
The attached photos are what I have, and the coiled mess of 2/0 cable on the firewall is the end of the current too-long and misrouted starter cable
![PXL_20240510_050057680.jpg PXL_20240510_050057680.jpg](https://www.steelsoldiers.com/data/attachments/678/678277-9709a34f33663e3c87e62719884d117e.jpg)
![PXL_20240510_050114236.jpg PXL_20240510_050114236.jpg](https://www.steelsoldiers.com/data/attachments/678/678278-5c3b206a26e52714efd3944c5a228a0d.jpg)
![PXL_20240510_045942970.jpg PXL_20240510_045942970.jpg](https://www.steelsoldiers.com/data/attachments/678/678280-4db8aec6e7c54a8c2ee65b0464bc6966.jpg)
Can anyone share a description or photo of how the starter positive cable should be routed?
The attached photos are what I have, and the coiled mess of 2/0 cable on the firewall is the end of the current too-long and misrouted starter cable
![PXL_20240510_050057680.jpg PXL_20240510_050057680.jpg](https://www.steelsoldiers.com/data/attachments/678/678277-9709a34f33663e3c87e62719884d117e.jpg)
![PXL_20240510_050114236.jpg PXL_20240510_050114236.jpg](https://www.steelsoldiers.com/data/attachments/678/678278-5c3b206a26e52714efd3944c5a228a0d.jpg)
![PXL_20240510_045942970.jpg PXL_20240510_045942970.jpg](https://www.steelsoldiers.com/data/attachments/678/678280-4db8aec6e7c54a8c2ee65b0464bc6966.jpg)