m1009 starter issues.....

[Jonas]

So, today my truck(m1009) refused to start, i think it had to do with me blowing the flasher fuse the day before when fiddleing with the flashers, and now there is nothing happening when i turn the key to start.

The lights in the dash shuts off as its about to start, but the engine is not even cranking...

What i want to do is to follow the ignition cable all the way to the starter/ soleniod and see if there is power there when i turn the key....
any pictures of where this soleniod is and how it looks are apreceated..

The glowplugs are on a separate system with a push button and that relay is working fine i hear the relay "clonk" when i press the button....

please point me in the right direction here

On this picture below, what is the think most up to the left ?
http://i44.tinypic.com/10neqeh.jpg

On this picture below is guess its the ignition cables?

http://i43.tinypic.com/16hogsi.jpg

Thanks for all the help so far

 

[panicfreek]

I just did the same thing, how did you fix it