Please help. My mechanic put a new starter and flywheel on my m1009 (6.2). I found the bracket online (part # 14028931). However, that bracket did not fit and research led us to conclude that it was for the 6.5 starter. The local Chevy dealership had the bracket suggested for the 6.2 (part# 23502557). That bracket did not fit either and so the mechanic made one to fit. Everything worked great until the entire starter casing cracked into five pieces. I'm at a complete loss. Does anyone know the correct part #s for the starter and starter bracket for a 1985 m1009 with the 6.2? Or is there something else that I'm missing altogether? Any help would be greatly appreciated.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1009 starter problems
- Thread starter empready
- Start date
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
You still running a 24 volt system, right?
Stonepicker1
Well-known member
- 2,446
- 86
- 48
- Location
- Coconut Creek, Florida
In the "search" box, type in: CUCV bracket or CUCV Starter for more info. Or look at the threads at the bottom of the page.
You did not say which starter you have (had). The old style direct drive or the new style gear reduction. Different brackets for the different starters.
GM 15544950 - Starter Bolt
GM 14060613 - Starter Bracket to Block Bolt - M8 x 1.25 x 20 (hardware store)
GM 14028931 - Starter Bracket - old style Direct Drive starter
GM 23502557 - Starter Bracket - new style Gear Reduction starter
GM 15544950 - Starter Bolt
GM 14060613 - Starter Bracket to Block Bolt - M8 x 1.25 x 20 (hardware store)
GM 14028931 - Starter Bracket - old style Direct Drive starter
GM 23502557 - Starter Bracket - new style Gear Reduction starter
Last edited: