M101 Dimensions

[Recovry4x4]

At least as high as a normal full size pickup. I can measure my A3 when I get home. Looking at the data plates I'm estimating 28".

 

[cheiser666]

Thanks recovery. As long as its not as high as my m1008. If its as high as my Colorado, I'm fine with that.

 

[joediveguy]

I have a couple M101A2 frames in the classifides that will work perfect. In fact, I just picked up a S250 that I plan on mounting to one of them! No bed to worry about modifying.

 

[StrykerPerry]

I use mu M101A2 to haul my 4 wheeler i put a hand crank winch on the front of it and cut a hole to run my cable through also I dont need ramps because it tilts perfect to load mowers and other stuff

also when i dump it the bed is about 6 in from the ground then I open the tailgate to make it touch the ground works great

 

[alpancheri]

Blackfox, could you tell me the length from the front e.d to the wheel well and from the wheel well to the back end of your m101 a2 please, im trying to figure out if i could do a bed swap on my f150 6' bed, with a little cutting and welding of the initial cargo box.

 

[Extra245]

I know this is an old post, but the title fits so...
I recently bought an M101A2 without the rails, bows and cover and wanted to make my own enclosure frame that a correct cover would fit.
Could anyone please provide dimensions for:
Rail Height (From Top of Cargo Box to Top of Rail)
Bow Height (From Top of Rail to Top of Bow)
Bow Outside Radius (Radius of Curvature on the Top Left & Top Right Corners of Bows)

Thank You

 

[85 USMC M998]

I know this is an old post, but the title fits so...
I recently bought an M101A2 without the rails, bows and cover and wanted to make my own enclosure frame that a correct cover would fit.
Could anyone please provide dimensions for:
Rail Height (From Top of Cargo Box to Top of Rail)
Bow Height (From Top of Rail to Top of Bow)
Bow Outside Radius (Radius of Curvature on the Top Left & Top Right Corners of Bows)

Thank You

Extra245,
Were you able to come up with dimensions? I have a M101A1 with the stakes that I could measure for you.

 

[McGuyver]

Valence has some rack metal parts for sell if you need some.

Sent from my SM-G920V using Tapatalk

 

[85 USMC M998]

I may know of some M101A1 stuff for sale as well.

 

[HMMWV NEWBE]

I have a 1996 USMC M102a2 trailer with stacks and bows will a m101 cover fit Thanks

 

[Evil Dr. Porkchop]

I have a 1996 USMC M102a2 trailer with stacks and bows will a m101 cover fit Thanks

Yes, all 4 cargo variants of the m101 can use the same cover.
EDIT: Wait, m102a2? Post a picture. Never heard of it.

 

[HMMWV NEWBE]

 

[HMMWV NEWBE]

That's it

 

[Recovry4x4]

Looks like an M101A3. Yes, the American 101 stuff will fit your box.

 

[HMMWV NEWBE]

Thanks