• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1010 ac wiring

Technic6490

New member
4
0
1
Location
Illinois
I was looking at my m1010 which doesn't have the ac working at the moment, I see a relay going to a breaker, going to the high pressure switch on the dryer, which then goes to the compressor, and grounds out the other side of the compressor. I have a red dot evaporator unit bolted to the back of the cab and it looks like the compressor gets its power from the switch on the unit. There should be a low pressure switch somewhere right? I'm not seeing it
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks