- 1,055
- 1,907
- 113
- Location
- WOBURN. MA.
The Pinzgauer door is going to be real close to hitting the M101A2 master cylinder res cap and hoping someone here know of a lower profile cap that will work. The stock cap is about 1 3/4" tall and things would go much easier if I just had a near flush cap. I am installing an height adjustable lunette setup this weekend.
Thanks Guys,
Mark
![20130816_185821.jpg 20130816_185821.jpg](https://www.steelsoldiers.com/data/attachments/305/305997-a741e9ee94a6c8bbb5954451c41435a0.jpg)
![$(KGrHqV,!lEFHVrvuez+BR5vTQIJm!~~60_12.jpg $(KGrHqV,!lEFHVrvuez+BR5vTQIJm!~~60_12.jpg](https://www.steelsoldiers.com/data/attachments/305/305282-b0fb074ec024cbe899505246e85ef239.jpg)
![20130816_181923.jpg 20130816_181923.jpg](https://www.steelsoldiers.com/data/attachments/305/305999-4dc4fd5a6f1a997d509f9be3fe130fc8.jpg)
Thanks Guys,
Mark
![Master-Cap.jpg Master-Cap.jpg](https://www.steelsoldiers.com/data/attachments/305/305995-8c26cc8dc30f438f3380c7874cc0ba37.jpg)
![20130816_185821.jpg 20130816_185821.jpg](https://www.steelsoldiers.com/data/attachments/305/305997-a741e9ee94a6c8bbb5954451c41435a0.jpg)
![$(KGrHqV,!lEFHVrvuez+BR5vTQIJm!~~60_12.jpg $(KGrHqV,!lEFHVrvuez+BR5vTQIJm!~~60_12.jpg](https://www.steelsoldiers.com/data/attachments/305/305282-b0fb074ec024cbe899505246e85ef239.jpg)
![20130816_181923.jpg 20130816_181923.jpg](https://www.steelsoldiers.com/data/attachments/305/305999-4dc4fd5a6f1a997d509f9be3fe130fc8.jpg)