M101A3 data plate - pic needed

[Billsbet0]

I'd greatly appreciate it if an M101A3 owner could post a few pics of their data plates? I need to have some made for my trailer but need to know what they look like. I have the SN for my unit.

Thanks!

Billsbet0

 

[neilhendrix]

I`ll try to get some tomorrow .

 

[RidgeRunner609]

If you can I would appreciate a picture of it as well. I've been looking for a good picture of either a m116a3 data plate or an M101a3 data plate. A Kasel would be great but any of them would be great.

 

[Nonotagain]

If you look at my albums there are pics of the 116a3 data plate.

 

[doghead]

There's pics in the Tm.

 

[RidgeRunner609]

I looked in the TM and only remember seeing the diagrams for the m116a2e1 trailer if I remember right and the M101a2. I don't know if I missed the A3 plates or not. I'll go back again and take a look. Thanks, notagain those should work for what I need.

 

[doghead]

M116A2, M116A2E1, and M116A3 Chassis Trailers all show the same data plate in the TM.

 

[serious_lee]

Here's mine... not sure if you're still looking for one. I can't make out the plate on the frame since it's all faded, but this one is pretty clear.

 

[blisters13]

Thanks Lee- mine has no black paint left, just shiny aluminum. With this pic I can show the DMV clerk that the numbers stamped in my plate correspond to the fields showing what they are (hope that works!).

 

[Speir13]

data plates

some I have found, looking for them myself...

 

[tomcata3]

Here is all of them, call this guy and he can print them out and send them to you
Greg Knoyle (406)543-8816
dataplates.net - 1963 South 14th Suite A - Missoula MT 59801
dataplates.net
View attachment M116A3.pdf

 

[emmado22]

 

[juanprado]

View attachment 849745

Interesting. Always seen the tie down plate on the m116 frame. What is the mode vse did?

 

[emmado22]

They are different tie down plates.

 

[juanprado]

I see it now. This is for the late model a2 and a3 ribbed beds with the 4 lifting eyes. Could you take another close up pic of the plate. I could use 2 and maybe I can find someone to duplicate.

 

[emmado22]

Give it some time, the "cargo box" tie down plate is in the works,