BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
OK... I see the kind I have are bolted on and use a 9/16 socket. Check inside to see if they are bolted on.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M101a3 trailer build
- Thread starter BUGOUT2
- Start date
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Well, poopoo, mine are welded. I shall reach out to reading and see if I can buy the ones you have. If you happen to remove one of your for adjustments, can you snap a pic please?
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
You could cut off the mounts and use hinges. I used a 1 1/2 piano hinge on my back door.BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Built the drivers side trailer door this weekend TWICE the first try was 3 inches too small 16x19 not 16x16.
- 1,394
- 178
- 63
- Location
- Frisco Texas
Hate it when I do that.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
I finished the drivers side door and painted it.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Looks like it's going to a busy weekend.BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
- 1,394
- 178
- 63
- Location
- Frisco Texas
Looks nice. What is the cost of this product compared to monstaliner or some of the others. How was the coverage?
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
I paid $ 150 for 6 bottles from Amazon. Took less than 24 hours to get it shipping was free.
- 1,394
- 178
- 63
- Location
- Frisco Texas
Ok, 3M makes a similar product to that. I used it to to spray the wheel wells on one of my 1101’s. Took one can per wheel well. Good stuff for sure. I don’t think coverage was economical with the 3M product compared to Monstaliner, which seems to be the favorite of most of the Jeep guys. But, for the application and speed and cleanup, it was worth it.
Yours looks really good.
Yours looks really good.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Today I will put in the side panels then I can spray inside the entire bed and tailgate. Also the tounge box, bumper and brackets.
Last edited:
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
well I didn't get everything done.
- 409
- 11
- 18
- Location
- Dittmer, Mo.
Looks great!
- 1,394
- 178
- 63
- Location
- Frisco Texas
That turned out really nice, and for the price, looks like you got a lot covered.
Was that in aerosol cans? Or pressurized cans? The 3M stuff I used was in a can that was pressurized. You had to be careful, because it was still kind of heavy when it was done. Bit of a learning curve to it.
Well done.
Was that in aerosol cans? Or pressurized cans? The 3M stuff I used was in a can that was pressurized. You had to be careful, because it was still kind of heavy when it was done. Bit of a learning curve to it.
Well done.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
This is what I used from Amazon $150.00 delivered the next dayBUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
Got another 6 bottles of raptor liner, I sprayed the battery box, bumper and the lid for the interior front box.
next weekend I will spray the interior side panels, tire carrier and brackets.
next weekend I will spray the interior side panels, tire carrier and brackets.
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
BUGOUT2
Member
- 78
- 2
- 8
- Location
- Carson California
one 13x24 door built. One more to go need primer and paint