• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M103a3 powerplant switchbox

Dog Breath

Active member
Steel Soldiers Supporter
78
109
33
Location
Wisconsin
I have a powerplant trailer with two 003a’s. All parts seem to be there except for the internals in the switch box. I cannot find any info for the box or any for sale. Any help would be appreciated
 

Ray70

Well-known member
Steel Soldiers Supporter
2,749
6,531
113
Location
West greenwich/RI
I can confirm it will work. I'm using that style synchronizing switch to switch between an 002 and 003, depending on anticipated load.
The best part is you can synchronize and switch under load, the original 002/003 switch box was not a synchronizer, it was only intended to transfer the load from 1 gen to another for service reasons.
 

runk

Active member
543
66
28
Location
Houston, TX
If you are looking for the information on the original box, you need TM5-6115-633-14&P. (I think it's in the TM section here.)
. POWER PLANT
. AN/MJQ-18 ( NSN 6115-00-033-1398 ) (2) MEP-003A 10 KW 60 HZ
. GENERATOR SETS M103A3 2-WHEEL, 1 1/2 TON MODIFIED TRAILER
The transfer switch in my box is an Electroswitch, attached are some catalogs I found. The part number in the TM references several other manufacturers in a current search.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks