M105 landing gear part

[WillWagner]

I swapped the crank up gear off of the GL trailer to the free one yesterday. I had already installed the armstrong gear and come back home and realized that the thrust wasn't on the crank up one. Does anyone have a thrust washer they wanna sell?

 

[clinto]

Big flat washer on top? Under the retention nut? If so, I am 95% sure I have one you can have for free.

 

[WillWagner]

Hey Clinto, Nope, it't the brass or bronze one that goes on the bottom side so when the unit is unhooked, there is a bearing surface for the gear to pivot on. Thanks for the offer.

 

[WillWagner]

Went back and pulled the washer off of the other trailer tonite. Measures 3.0 od. 2.040 id. .125 th. Made of bronze. Looked at McMaster, found 2 that will do nicely. The id is .040 smaller than needed, but that can be fixed easily. The page won't link, but here's some p/n's 7814K42 or 5906K528. Here's a pic of the washer in question.