• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m105a2 paint job

Deuce007

New member
138
1
0
Location
North Dakota
I posted this thread in the paint and body works section and didn't get any bites so I want to try this thread in the trailers section instead. I am wanting to to a paint job on my m105a2 and was wondering if anyone was any recommendations of what paint I should use. I was thinking of using an oil based O.D. green and just use a spray gun to apply it but I am open to suggestions.
 

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,319
3,212
113
Location
Fort Worth, Texas
Rapco paint is what I suggest. Comes in both gallon buckets or spraypaint cans. I've done a whole truck with it before and it looks sharp.
 

Wildchild467

Well-known member
Steel Soldiers Supporter
2,052
57
48
Location
Milford / Michigan
I love the way my rapco went on. i suggest buying the gallons and using a regular automotive spray gun set-up to spray it. the paint takes a while to harden up where it wont "mar" or scratch.... but it sure does stick real good! i didnt primer mine or anything. i just used a DA to sand it down and smooth it up real nice before i sprayed it. i figure 2 gallons and you will definately have enough paint to do the whole thing inside and out.

I painted the side racks and stenciled it after i took this picture... but you get the idea.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks