Pawnshop
Active member
- 1,798
- 23
- 38
- Location
- Austin/Cedar Park Texas
I need another M105A3 jack, the one that stows on the fender and is used to lift or stabilize the trailer (NOT the nose wheel/landing gear). Where can I find one?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M105A3 jack
- Thread starter Pawnshop
- Start date
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Would like to see a picture. Not familiar with what you're talking about. My M103A3 trailer has a fold-down stabilizer leg built into the rear, but it's not any kind of jack.
- 1,926
- 30
- 48
- Location
- Irmo, South Carolina
You can buy them occasionally from GL, however they usually come with a trailer attached 
.
Otherwise I would try Saturn, Memphis, White Owl and so on.
Rick
. Otherwise I would try Saturn, Memphis, White Owl and so on.
Rick
Nonotagain
New member
- 1,444
- 41
- 0
- Location
- Parkville, MD
Here's the good and bad news on the jack assembly.
The good news is that I found the NSN number for the jack, but it's not called a jack, it's a stabilizer.
It's a made by Pribbs, but good luck getting one from them.
Cage code 7J015
NSN 2590014875447
SUPPORT,RETRACTABLE,TRAILER
Quite a few of the trailers have come thru without the jack assembly on them. I would suspect that they didn't get stowed back on the fender and then lost. A few trailers at the site to remain nameless have shown the jack still pinned in the rear socket.
Hope this helps.
The good news is that I found the NSN number for the jack, but it's not called a jack, it's a stabilizer.
It's a made by Pribbs, but good luck getting one from them.
Cage code 7J015
NSN 2590014875447
SUPPORT,RETRACTABLE,TRAILER
Quite a few of the trailers have come thru without the jack assembly on them. I would suspect that they didn't get stowed back on the fender and then lost. A few trailers at the site to remain nameless have shown the jack still pinned in the rear socket.
Hope this helps.
Pawnshop
Active member
- 1,798
- 23
- 38
- Location
- Austin/Cedar Park Texas
Thanks! I will keep searching. I have a bad hip and that jack is perfect for lifting the tongue on my 101 trailers, they are just a bit too much for me, and downright necessary on the 105... I will. post a photo this afternoon.
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
I've bought stuff from them before. Home
- 4,218
- 3,265
- 113
- Location
- Near Austin, Texas
Here is a picture of the jack/stabilizer (the manual refers to it as both, and it is used for changing the trailer tires as well as leveling. Pretty cool!).
Thought I would go ahead and post it for Pawnshop since his trailer is parked out at my place. This is my trailer, Pawnshop's doesn't have a dented fender..
Cheers
Thought I would go ahead and post it for Pawnshop since his trailer is parked out at my place. This is my trailer, Pawnshop's doesn't have a dented fender..
Cheers
Attachments
Pawnshop
Active member
- 1,798
- 23
- 38
- Location
- Austin/Cedar Park Texas
Thank you Sir! My trailer is at your place but my jack is not, I am using it on my M101s, all THREE of them!
86m1028
Active member
- 1,687
- 17
- 38
- Location
- Murphy TEXAS
I have an extra one, pm me an offer.
Pawnshop
Active member
- 1,798
- 23
- 38
- Location
- Austin/Cedar Park Texas
PM sent!
Nonotagain
New member
- 1,444
- 41
- 0
- Location
- Parkville, MD
Any chance that you have an old nose wheel jack for the M105a3 trailer? You know the one that everyone complains about not being strong enough.
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
I have to concur with Pawnshop on how handy they are. My 105 is stationary (has a 600 gal diesel tank in it) but I use the jack to lift my MKT. Since the landing gear on it is screwed up the jack is the only way I can get it on the pintle.