Jean Pierrd
New member
- 11
- 7
- 3
- Location
- Bakersfield
Can anyone tell me where the flasher is for the turn signals
Sent from my SM-G892A using Tapatalk
Sent from my SM-G892A using Tapatalk
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1078....flasher
- Thread starter Jean Pierrd
- Start date
B-Dog
Well-known member
- 167
- 294
- 63
- Location
- Denver, CO
There should be a black box under the PDP (fuse box) on the passenger side.
Jean Pierrd
New member
- 11
- 7
- 3
- Location
- Bakersfield
Awesome thanks
Sent from my SM-G892A using Tapatalk
Sent from my SM-G892A using Tapatalk
coachgeo
Well-known member
- 5,219
- 3,551
- 113
- Location
- North of Cincy OH
hmmm.... on the A0... seem to recall differently
Lmtv blinker problems
so my lmtv blinkers and hazardous lights stop working after a 30 minute drive This has happened multiple times and always started working again the next day Is my problem the blinker and if so where is it located? where should I purchase? thanks
www.steelsoldiers.com
Is the A0 and A1 or A1r in different places?
Ronmar
Well-known member
- 4,471
- 8,380
- 113
- Location
- Port angeles wa
Under, meaning under the entire dash behind the passenger kick-panel… aluminum heat-synced case with 3 pin cannon plug. Replaced mine with a solid state flasher module…
mikemike1079
New member
- 7
- 1
- 3
- Location
- colorado
Hiya did you replace it with the 3 pin square one for like a car?
Ronmar
Well-known member
- 4,471
- 8,380
- 113
- Location
- Port angeles wa
I used this 3 wire 12A commercial unit from Grote(#44010). Same 3 inputs, B+ in, ground and pulsed/flash output… Removed the cannon plug and used male/female spade connectors, ~10min installation…, ~$35 online…
Attachments
mikemike1079
New member
- 7
- 1
- 3
- Location
- colorado
BBeautiful thank you
Beautiful I'm going to order that right now thank you