MapleNomad
New member
- 11
- 2
- 3
- Location
- Massachusetts
Alright fellas i've been following a few different threads here to try figure this stating issue but i was a 91S not a 91B so i don't have the same wealth of knowledge as the light wheel guys. I got a M1079 1998 witec 3. When you flick on the power switch on the dash, there are no clicks or start up sounds (except one relay i cant remember right now) and the start button does not activate the starter solenoid. Bypassing the starter solenoid (wall mount solenoid not the starter itself) turns this guy over. Ive tried the trick where you take the k1 starter relay out and take a jumper cable to 30 and 87, to no response. The starter solenoid has been replaced with one from Midwest military industries/didn't fix. I have new 24v relays for K1 and K19/ nothing. And brand new 1000cca batteries/ again nothing. Any hints towards what to do next would be appreciated.