-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1081 4X4 LMTV air drop cargo truck pic and info request
- Thread starter DukeNukem
- Start date
pontiac62
Member
- 180
- 4
- 18
- Location
- battle creek, mi
What kinda information are you looking for?
If you looking all the specs. Google M1081. I’ve got one but don’t have any real pictures of it. Member Masspilot has some of his pictures on here. He’s currently putting a habitat box on it.
Sent from my iPhone using Tapatalk
Man of few words
M1081 LVAD
If you looking all the specs. Google M1081. I’ve got one but don’t have any real pictures of it. Member Masspilot has some of his pictures on here. He’s currently putting a habitat box on it.
Sent from my iPhone using Tapatalk
Man of few words
M1081 LVAD
- 4,775
- 1,178
- 113
- Location
- Gaithersburg, MD
SUPRMAN in the Northeast (CT or MA, I forget) is selling one in the classified section. There are several pictures included.
- 10,499
- 6,631
- 113
- Location
- Camp Wood/LC, TX
Go to GP website and look up past sales of "M1081".
- 1,397
- 380
- 83
- Location
- Feasterville, Pennsylvania
.JPG)
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
A picture like this maybe?
Crapgame
Well-known member
- 639
- 337
- 63
- Location
- Navarre, FL
Joe's M1081 is still parked in my backyard. What pics do you need? Attached is the only air drop pic I have, but its the 5ton M1094 LVAD/LAPES Air Drop Truck
Attachments
Last edited:
wandering neurons
Active member
- 249
- 113
- 43
- Location
- Fallon, NV
LVAD M1081 photos
Here's a couple of photos if that'll help.
First is of my M1081 resting against a tree. I was trying to drive out of the back yard in Maryland after several weeks of rain, the truck slid down the slight slope and rested against the tree. I used the Self Recovery Winch (SRW) to extricate myself. The LMTV is very capable of getting stuck!!!
BTW, the light bar on the roof is custom, not standard equipment. Something I had laying around.
Second is of the M1081 loaded with lumber in Colorado. Buddy is going to build on a hillside, was felling trees but couldn't get them up the hill and didn't have transport for them to the mill. Again, SRW to the rescue dragging logs, and used the home-made davit crane in the back of the bed to load.
The biggest visible differences between the M1078 and M1081 (LVAD):
Detachable roof
Hinges on doors, windshield, and rear of cab to fold cab into itself
Split in middle of the windshield (regular M1078 is one piece)
Crane that is part of the spare tire lifting mechanism to remove/reinstall cab roof
In-bed parachute attachment fittings
There's a few other pieces of equipment that are mounted under the bed that's part of the airdrop/low-velocity aerial delivery (LVAD) package
The TMs also have various sections with drawings showing the various LVAD parts
Can do more pics if there's something in particular that you need. Specific corner, angle, interior, exterior, etc.
Here's a couple of photos if that'll help.
First is of my M1081 resting against a tree. I was trying to drive out of the back yard in Maryland after several weeks of rain, the truck slid down the slight slope and rested against the tree. I used the Self Recovery Winch (SRW) to extricate myself. The LMTV is very capable of getting stuck!!!
BTW, the light bar on the roof is custom, not standard equipment. Something I had laying around.
Second is of the M1081 loaded with lumber in Colorado. Buddy is going to build on a hillside, was felling trees but couldn't get them up the hill and didn't have transport for them to the mill. Again, SRW to the rescue dragging logs, and used the home-made davit crane in the back of the bed to load.
The biggest visible differences between the M1078 and M1081 (LVAD):
Detachable roof
Hinges on doors, windshield, and rear of cab to fold cab into itself
Split in middle of the windshield (regular M1078 is one piece)
Crane that is part of the spare tire lifting mechanism to remove/reinstall cab roof
In-bed parachute attachment fittings
There's a few other pieces of equipment that are mounted under the bed that's part of the airdrop/low-velocity aerial delivery (LVAD) package
The TMs also have various sections with drawings showing the various LVAD parts
Can do more pics if there's something in particular that you need. Specific corner, angle, interior, exterior, etc.
- 135
- 78
- 28
- Location
- Netherlands
This is my 2008 M1081A1 with Cat C7
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
nice truck. Change those tires out soon... they have a poor safety history if you do highway mostly. Otherwise..... RE: this thread.. OP seems to have given up on this idea... though this thread seems to stay alive.
Third From Texas
Well-known member
- 2,777
- 6,529
- 113
- Location
- Corpus Christi Texas
Yeah, his history shows that he sort of jumps from vehicle-to-vehicle asking questions. He even PM'ed me once asking for my number, but he never called. This thread followed soon after.
/shrug
/shrug
wandering neurons
Active member
- 249
- 113
- 43
- Location
- Fallon, NV
Well, at least the CTIS wheel valves look salvageable. The rest of the vehicle and the 463L pallets - not so much...
- 882
- 525
- 93
- Location
- tucson AZ
I don't think that will buff out....
- 882
- 525
- 93
- Location
- tucson AZ
First is of my M1081 resting against a tree.
Its just marking its territory.
Its just marking its territory.
wandering neurons
Active member
- 249
- 113
- 43
- Location
- Fallon, NV
Yeah, but not in a good way. Took several hours to get the truck out of the yard. And the yard still hasn’t fully recovered.
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
shute failed? Looks like it landed inverted with quite a thud
I'm still here. Other than the HMMWV I was considering but I was told it had many issues. Let's leave it at that.
The other was a compatible bed box.
Sorry to the fella I didn't call. I'm a night owl pretty much as most know do to my past job so I can't really call the middle of your night sir.