gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 769
- 113
- Location
- Cincy Ohio
Hey Kenny(and Walter), mermites do too!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M109 Camper Build
- Thread starter Green_gator
- Start date
- 26,246
- 1,185
- 113
- Location
- NY
What's a memite? Is that the little gnome like guy you were hanging out with at the Fl rally?
vinny-socom1
New member
- 1,360
- 4
- 0
- Location
- Ocala, Florida
Any progress??? are you bringing it to the FL Rally??? Vinny
Verkstad
Member
- 88
- 1
- 8
- Location
- Idaho panhandle
Campers are great fun. Glad to see you are using your boy as justification to build out !
One thing with rigid foam insulation, I built a camper once and used rigidfoam, It works great as insulation for climatecontrol, But it does seem to transmit noise more than the fiberglass batting was in there before.
Also, For heat a woodstove is one option, Another option for heat is a oilstove like used on sailboats. Ofcourse woodstoves have advantage over it in some regards, I like an oilstove as its a more compact less fuss fuelsource.
Enjoy your fun with it !
Jakob
One thing with rigid foam insulation, I built a camper once and used rigidfoam, It works great as insulation for climatecontrol, But it does seem to transmit noise more than the fiberglass batting was in there before.
Also, For heat a woodstove is one option, Another option for heat is a oilstove like used on sailboats. Ofcourse woodstoves have advantage over it in some regards, I like an oilstove as its a more compact less fuss fuelsource.
Enjoy your fun with it !
Jakob
vinny-socom1
New member
- 1,360
- 4
- 0
- Location
- Ocala, Florida
WALT!!! its been a long time since you updated this thread???? I know you have been working on your M109!!!! Lets see some pictures!!!
Vinny
Vinny
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 769
- 113
- Location
- Cincy Ohio
Yeah!
SGTStewart
Member
- 223
- 16
- 18
- Location
- Owatonna, Minnesota
Thanks for this tool, works great. I have most of my camper ideas laid out on there, and I now have a better idea how it will look. Tried to post a picture from there, don't know if it can be done.
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
How is the project coming?
SCSG-G4
PSVB 3003
- 5,392
- 3,456
- 113
- Location
- Lexington, South Carolina
He had it at the 2010 FL Rally, but I think he was too busy with his MKT to take pictures.
lwizardl
New member
- 24
- 0
- 1
- Location
- Battle Creek, MI
there is a couple very simple ways to do this.Thanks for this tool, works great. I have most of my camper ideas laid out on there, and I now have a better idea how it will look. Tried to post a picture from there, don't know if it can be done.
1) file -> export -> 2D image and choose jpeg (might be off on the naming but i think that was how i did it.)
2) on your keyboard you should have a button labeled "prt sc" usualy next to "scroll lock" key. press the print screen key whic is that prt sc key. then open any image edition program and select paste. a image of the current screen when you pressed the prt sc key will show up to be saved.
very interested in these builds
Danger Ranger
New member
- 2,253
- 24
- 0
- Location
- Roland, IA
I second the request for progress!!!!!
- 34,010
- 1,821
- 113
- Location
- GA Mountains
Walters last activity on here was 5/18. Anyone heard from him? Did he show @ Richloam?
Danger Ranger
New member
- 2,253
- 24
- 0
- Location
- Roland, IA
Bump, or did I miss something?
135gmc
New member
- 307
- 1
- 0
- Location
- St Paul/MN
You can sketch out a floor plan on graph paper, but its also easy to use some chalk and draw the 109's interior outline on a concrete slab, then you can try things full size to be sure that everything fits before you start sacrificing lumber. You can also do this inside the 109's box - mock up the dinette with some cardboard and tape to be sure that everything fits and that nothing gets in something else's way - old carboard is a lot cheaper than plywood.
