WhoMe08721
Active member
- 191
- 123
- 43
- Location
- Bayville/NJ
Hey Guys,
What is this black box under the hood for???
What is this black box under the hood for???
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1097A2 Black Box Under Hood
- Thread starter WhoMe08721
- Start date
- 7,769
- 19,877
- 113
- Location
- Charlotte NC
.
Box for your Jack and Tools
- 4,414
- 4,207
- 113
- Location
- Brentwood, Calif
It’s for the Jack that doesn fit the A2 control arms, its also the black box that’s in the way of everything
- 3,003
- 4,420
- 113
- Location
- Olympia/WA
The jack I have stored in that box seems to work fine with my control arms. I don't know if that's because of the M1123 MAK that was installed or not.
The one bit of advice I did get concerning that box is if you're going to keep it there then you really want to wrap some type of strap around it to prevent it from opening while you are driving and causing your day to go bad...
The one bit of advice I did get concerning that box is if you're going to keep it there then you really want to wrap some type of strap around it to prevent it from opening while you are driving and causing your day to go bad...
- 14,263
- 1,767
- 113
- Location
- Dayton, OH
From the looks of it that seems like a really good idea.
- 4,414
- 4,207
- 113
- Location
- Brentwood, Calif
that would mean you have early single hole lower control arms…the correct control arms have 2 small holes And take 7/16 lower ball joints.