Ok have some time to give the build much needed attention. Three items on the menu.
1. Adapt a sink and faucet using one of the original radio racks as a prototype to try and keep the style of the commo shelter. Will post pics tomorrow of how this is looking and showing the concept.
2. Devise a mounting system for the shelter to trailer that doesn't use cable tie downs on the upper lifting eyes. Being aware that the shelter skids are a shock absorber type of configuration and not ridged. This will take some time and trial and error to figure out.
3. Permanently mount the Climate Rite AC unit in a way that doesn't stick out from either end of the shelter. I have an idea for this that I want to test fit before posting pics and design. Tested the AC just thru one of the shelter vent side doors and it should be adequate to cool the shelter. Little AC is only 2500 BTUs and draws 450 watts so 1000w gen should work perfectly. The AC was designed for a dog house, believe it or not, and uses two 3" hoses for supply and return.
Also got some rubber material to replace the weatherstrip flaps on all the hatches.
Going to flip the hitch ring tomorrow and hitch it up to the LMTV.
OD
