M1123 Front Seat Belt (Lap and Shoulder)

[abfisher1798]

My M1123 came with interesting seat belts. There is a separate retractable belt for the shoulder and for the lap, so that you can belt in one or the other or both. The buckle has a slot for each belt and a single pull releases both.

The lap belts work fine, but both the shoulder retractors are worn out. Does anyone know the PN for those shoulder belts? I'd like to replace them with OEM rather than switch to a standard 3-point.

Thanks!

 

[Coug]

Mine had sand in them.I had the same type of issue, not worn but had enough sand/grit in them to keep them from working.
Managed to clean one of them up without damaging the plastic retainer inside too much, but replaced the other.

I checked my ebay history, part number I ordered the shoulder strap under was 2005174-1
( I don't see any for sale currently on ebay though)

https://www.parttarget.com/2540-01-541-9228_2540015419228_2005174-1.html

EDIT:
Looks like MAC motors and HPG have them in stock, MAC being a bit cheaper at only $104.

 

[abfisher1798]

Mine had sand in them.I had the same type of issue, not worn but had enough sand/grit in them to keep them from working.
Managed to clean one of them up without damaging the plastic retainer inside too much, but replaced the other.

I checked my ebay history, part number I ordered the shoulder strap under was 2005174-1
( I don't see any for sale currently on ebay though)

https://www.parttarget.com/2540-01-541-9228_2540015419228_2005174-1.html

EDIT:
Looks like MAC motors and HPG have them in stock, MAC being a bit cheaper at only $104.

That’s exactly what I’m looking for! I’ll get ahold of MAC.
Thanks!