M113A3 crossdrive

[wehring]

Hey folks. I need some help tracking down an Allison X200-4. The variants are A, B and C. I want to convert my track to the A3 drive.

Justin Wehring
979 997 3112

 

[BKubu]

Justin, you found an M113?

 

[wehring]

Not quite

I am still updating the XM474E2. It uses the M113 drive system. If I replace the current set up I can omit 2 of the required components and install a Cummins.

The vehicle currently consists of a motor, crossdrive, transmission and steering dif.
The engine compartment is cramped because the engine and trans sit side by side instead of in-line. The A3 combines the trans, cross drive and steering dif into one unit. The only components in the engine bay will be the X200-4 and Cummins in a linear configuration.


Justin Wehring
979 997 3112

 

[wehring]

crossdrive

Wow... i finally received a call back on the X200-4 search. $10,000 for a pull out with no warranty. After I got over the sticker shock I bought a shifter and learned about the required wiring harness. These are not computer controlled but they do have a cannon plug for a wiring harness. This is good news because I figured there would be a computer I would need to tie in. I am closer to this conversion in knowledge but I cannot afford $10K for the crossdrive. So the search continues.

Justin Wehring
979 997 3112

 

[colt45727]

.....You sir... are awsome.....