M116A2 in M105 ?

[m38inmaine]

Will a M116A2 Genset trailer fit inside a M105 1 1/2 ton trailer? I would like to bring both back at the same time, only have enough length for one, would like to stack the 3/4 ton in the 1 1/2. Thank you.

 

[scooter01922]

I would say yes if the gen trailer in question is the same model as the one i'm holding for you. Much narrower than the deuce hence it should fit in the 105 just fine. i don't see the length being much of an issue either. Does this mean it's leaving ???? The guys at the place i keep the truck are getting antsy they are fast becoming of the opinion that i'm full of it and the trailer is never leaving.

 

[oilcan]

Yup, it'll fit. And it's a pain to load and unload without at least a bobcat or something.

 

[papercu]

According to the TM the M116A2 overall width is 73.5 In (6' 1 1/2 inches) and overall length is 147 in. (12' 3 inches) while the width of the M105 body is 6 ft 2 in. by 9 ft 2 in long. Wayne

 

[m38inmaine]

Thanks, yes it is leaving, either I will pick it up probably next week when I go to Drum or my friend Mike is bringing it back, I think around the 20th.

 

[scooter01922]

Super, if you plan on tossing it on top of that 105 give me a heads up and i can more than likely bring my bobcat to the site. That said, it may take a few days to actually get it over there so let me know as soon as you figure out what you would like to do.

 

[m38inmaine]

You will be the first stop so the trailer will be empty, I will just winch it on the trailer.

 

[scooter01922]

Ok, thanks for the update.