- 250
- 29
- 28
- Location
- Salmon, Idaho
Well here is what I came up with for the rubber piece under the hood. Took a piece of bungee and put it on with a couple 10-32 screws. replaced the hex headed bolts with countersunk fine threaded bolts. Will try this and see how it works. With the hood closed looks as though it will work great.
![100_3146[1].jpg 100_3146[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473615-b0261bc0f8c21641c815961d9d08e7e8.jpg)
Installed the external power connector and wiring that the early M135 came out with.
![100_3148[1].jpg 100_3148[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473617-35e3c4210d30faa627c4bf339e2c461e.jpg)
![100_3149[1].jpg 100_3149[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473618-340ea7c98c60e4f2ccfb071dc27b4920.jpg)
![100_3147[1].jpg 100_3147[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473616-1f38561fe60c5e382c28990a24ffd89a.jpg)
![100_3146[1].jpg 100_3146[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473615-b0261bc0f8c21641c815961d9d08e7e8.jpg)
Installed the external power connector and wiring that the early M135 came out with.
![100_3148[1].jpg 100_3148[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473617-35e3c4210d30faa627c4bf339e2c461e.jpg)
![100_3149[1].jpg 100_3149[1].jpg](https://www.steelsoldiers.com/data/attachments/473/473618-340ea7c98c60e4f2ccfb071dc27b4920.jpg)