gentrysgarage
Active member
- 553
- 118
- 43
- Location
- Lost Angels, CA
Been fighting for 2 plus days now the angles and clearance...either notch the crossmember for front output clearance or raise transfer case and rework both front frame mounts to lower engine trans. Engine/trans and tcase are centered in the frame, tcase front input and transmission output centered and rear output is centered to rear end pinion center.
What do you guys think?![IMG_3030.JPG IMG_3030.JPG](https://www.steelsoldiers.com/data/attachments/554/554843-2c21acfa25e6d00c19a944b892c156dc.jpg)
![IMG_3030.JPG IMG_3030.JPG](https://www.steelsoldiers.com/data/attachments/554/554843-2c21acfa25e6d00c19a944b892c156dc.jpg)
What do you guys think?
![IMG_3030.JPG IMG_3030.JPG](https://www.steelsoldiers.com/data/attachments/554/554843-2c21acfa25e6d00c19a944b892c156dc.jpg)
![IMG_3030.JPG IMG_3030.JPG](https://www.steelsoldiers.com/data/attachments/554/554843-2c21acfa25e6d00c19a944b892c156dc.jpg)