m151a1 clutch

[exoilfld]

Is there an adjustment for the clutch pedal travel on an a1?

 

[exoilfld]

I figured the rod to the t.o. bearing fork was threaded, so I started screwing it out to make it longer. Unfortunately, it screwed out. So, I added 1 inch to the rod and managed to get it screwed back in. All is well that ends well.

 

[nattieleather]

The rod that has a hook on it does the adjusting and the free travel on the M151. Clutch free travel should only be about 1/2-3/4 of an inch if my memory serves me correctly. But don't take my old memory as gospel you can look it up in the the -20 manual to be sure. Not sure if adding length to the rod is a good thing?

 

[joel]

I thought it 1.5" free play, approximately

 

[nattieleather]

I thought it 1.5" free play, approximately

Well, That's why there are TMs...lol. I was just going from memory and not from the TM...and God knows my memory ain't what it used to be.