• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M151A2 gun truck build

Lindsaym151

Member
666
12
18
Location
Eustis,FL.
Hey Gun junkies!
Im starting a new project!
I am mounting a M4 ped with a A&k Air soft 60 in the rear . Did anyone rver put a side gun for passenger on the 151 series truck?
If so what caliber and how would they have mounted it?
Also need leads on NOT MADE OF GOLD m-60 cradle
Thanks Gentelmen!
When I get this one done I'll start the gun ring project on the M35a2!!!!:smile::smile::smile::smile::smile::smile::smile::smile::smile:
 

Lindsaym151

Member
666
12
18
Location
Eustis,FL.
Hey Doc,
I take it it was only FAV's that had a gun forward?
Holy crap just noticed your from VT! I am originaly from Newport area!!
NO cows or snow in my life any more!
 

foxtrk2

Member
153
4
18
Location
foxboro ma
just to help you my friend just got a field modification gun set up off a 151 which includes the pedestal along with twin 60 mounts on the dash with a thumper middle sec of dash also windshield had to be kept in down position because braces wetre run across the hood to keep the dash from being torn apart by all the recoil
 

67Beast

Well-known member
963
445
63
Location
Silver Lake Sand Dunes MI.
Here is a link for M60 platform mounts. http://www.cranetechnologiesinc.com/M60PlatformMount.html I bought a couple of them to use on some airsoft A&K M60's I have. I had to mod them a bit to work with the airsoft rifles but not too bad and could still be used with a real M60. I had to add a little bit extra to the front tab so that it would reach on the airsoft M60 and had to file a little material out where the pins lock in to fit the slightly wider receiver on the airsoft version. Because I was not using it for a restoration vehicle, I just made the pintle's for them. I did however stick one on my M715 to see how it looks compared to the M2 on a MK-23 mount I usually have on it.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks