Hello all, new guy here and proud first time owner of a M35A2... I have been through the TM 9-2815-204-35 manual and it doesn't seem to have a rebuild section for the Fuel Pump Assemply - specifically the Hydraulic Head where all the fuel lines attach... I have a leak (slight spray) right where the four bolts hold the cylider (hydraulic head) to the rest of the Fuel Assebly Body. It's lightly misting / spraying out the slot where it looks like an area to pry (after you unbolt the four special purpose corner nuts... Can anyone direct / assist where to find an exploded assemply on the Fuel Pump Assemply so I can dis-assemble / replace / repair... Thanks, Mike - and I apologize for being new and not starting a new post correctly.