• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m35 gearbox

50cal

New member
12
0
0
Location
cheshire uk
hi can anyone please tell me if the m35a1 gearbox with a sprague transfer box is the same gearbox as the m35a2 with air shift many thanks mark
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,761
113
Location
Monrovia, Ca.
If it isn't a gasser it is the same if 5th is in the right side, forward position.
 

50cal

New member
12
0
0
Location
cheshire uk
hi i think mine was orignally a gas engine and reverse is left forward can i put the gearbox from an a2 into my a1 many thanks mark
 

mbouchard

New member
4
0
1
Location
Windham, New Hampshire
Hello all, new guy here and proud first time owner of a M35A2... I have been through the TM 9-2815-204-35 manual and it doesn't seem to have a rebuild section for the Fuel Pump Assemply - specifically the Hydraulic Head where all the fuel lines attach... I have a leak (slight spray) right where the four bolts hold the cylider (hydraulic head) to the rest of the Fuel Assebly Body. It's lightly misting / spraying out the slot where it looks like an area to pry (after you unbolt the four special purpose corner nuts... Can anyone direct / assist where to find an exploded assemply on the Fuel Pump Assemply so I can dis-assemble / replace / repair... Thanks, Mike - and I apologize for being new and not starting a new post correctly.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks