On my M35A2 there is a valve on the front panel that controls air to the wiper motors. The people I bought this truck from have this valve so tight that it will not move I will need to put pliers on it to get it started, however before I do this, to open this valve from a closed position do I turn it clockwise or counter clockwise? I hate to assume anything. Thanks, Lenny
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M35 wiper motorair line valve.
- Thread starter Lenny
- Start date
- 3,256
- 3,355
- 113
- Location
- NORTH (Canada)
It is a lefty loosy righty tighty valve. Worst case...new ones readily available from vendors.
Sent from my SM-T560NU using Tapatalk
Sent from my SM-T560NU using Tapatalk
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
Don't even try and rebuild it. Just get a new one like "cattlerepairman" said. I tried to fix mine and the "clearance" between the valve was to worn out to seal properly. Just wasted over an hour for nothing.