• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M35a2 clutch disc

gjanda94

New member
3
0
0
Location
Bryan, Texas
I'm replacing the clutch in my 1987 M35a2, New pilot and throw out bearings. New rear main seal. Flywheel machined, pressure plate and disc rebuilt. There is room but does it matter which way the disc is installed? I know the hub and dampeners usually go towards the transmission. I just wasn't sure on the deuce.
 
Top