eagle4g63
Well-known member
- 1,544
- 34
- 48
- Location
- North/west Indiana
Here is what when wrong, one of the pivot points broke, causing all the problem with the clutch.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M35a2 clutch ?
- Thread starter eagle4g63
- Start date
btcoutermash
New member
- 21
- 0
- 1
- Location
- Meriden, CT
Almost the same thing that happened to mine... Mine was the pivot that attaches to arm...
Hooty481
Member
- 707
- 6
- 18
- Location
- Russell County Kentucky
i had the same symptoms with my 818 a couple weeks ago and it turned out that my throw-out bearing had exploded. i hate that your was this bad
Lukas Avkovsky
New member
- 5
- 9
- 3
- Location
- czech republic
Hello, maybe this has been said before but I have a problem with the pressure plate on my deuce. I have a 4 toe and one pawl doesn't hold and keeps loosening causing poor shifting.
My question is
My question is
- Why is a 3-finger pressure plate better than a 4-finger one
- Can they be interchanged without major modifications?