M35a2 will not start.

[baxter1378]

I have what I believe to be a 76 M35a2 I can't get it to start I'm getting fuel and it is turning over but will not start. I'm not to fimilar with this truck yet because I just got it but any help and/or ideas would be so helpfull.

Thanks in advance
Jeff baxter

 

[steelandcanvas]

I'm sure others will chime in with assistance, however a good place to start is by downloading the Operator's Manual. Also, there is a "Similar Threads" option towards the bottom of the page. Lots of info on your particular problem.

 

[sandcobra164]

Where are you getting fuel? At the bleed screw on the secondary filters or are you cracking loose the injector lines? That will help us decide which path to walk you down.

 

[Big Dumb Truck]

Do you have the "J" shaped steel clip installed over the engine stop cable? I did that once. It started but barely ran. That's the kind of mistake you only make once.

 

[frank8003]

read these http://www.steelsoldiers.com/showthread.php?77607-TM-s-for-the-Deuce
download them
ask questions
Want pictures