• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M35A3 air shift problems

lonegunman

New member
298
3
0
Location
Eastern, Washington
air valve.jpg

I have an A3 with a bad air leak on the front axel solenoid in the cab. Both plastic elbows were cracked and I replaced them with suitable brass ones and the in and out air lines are snug and leak free. The valve is apparently the problem. It has a pressure relief hole directly behind the toggle that blows air constantly, slightly less when engaged. Bad enough that it drops my brake pressure 30-40 lbs at the guage.

Where can I get the solenoid?
 
Last edited:

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,196
314
0
Location
gainesville, ga.
That is just a standard air switch, all most all mv parts suppliers will have one, also that switch is used in the civi world, any truck parts house will have it or one very close to it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks