M35a3c won't run after storage (???)

[kawhill]

Greetings,

M35A3C with Cat 3116 engine sat for six months without running. Cranked it and it lit and started immediately. After about
ten seconds began to sputter and then died. Pulled fuel filter and it was dry. I've read the TM's and the posts here, but don't
know where to start checking. Obviously no fuel to filter. Machine is stock from GL with original Kevlar fuel hoses. I don't know,
air leak in fuel lines from tank? Any info that could be provided that would help me get this beast running before winter would
be most appreciated. Best regards.

Kawhill

 

[steelandcanvas]

Do you know the condition of that fuel? Not real familiar with the Cat, but it sounds like you may need to bleed the fuel lines.

 

[Warthog]

More than likely a stuck check valve at the tank.

Here is one solution.

http://www.steelsoldiers.com/showthread.php?115762-M35A3-No-Start-Lost-Prime

 

[kawhill]

Thanks much steelandcanvas and warthog. Clean check valve and pressurize tank. Runs like a striped ape. Thanks
and you have my best regards.

 

[Warthog]

Glad we could help.

 

[lawnmowerman]

Where is the check valve located have 3116 my self?

 

[Warthog]

The check valve is on top of the fuel tank on the M35A3

Item #24 in the diagram

 

[Hoefler]

I had the same issue. Check valve was stuck.
Pete