m37 seats

[guner51]

I need the bottom board and springs and a back to put on new canvas seats
or does anybody know were I can get the whole set-up with new canvas?

 

[M-37Bruce]

Hey Guner51,
you will need to make the bottoms, not many of them around. The canvas is available from several sources, Beechwood Canvas, New Life, WEE-BEE Webbing to name a few. I can sell you a tracing of the passenger bottom, but you can send the check $10, to the management here.

Check this link out, some good info there too!
http://www.steelsoldiers.com/m37/31622-wtb-m37-driver-seat-back-cushion.html

I don't think they will mind getting a bit o' the green? I also have a TO Passenger Back, springs and some scraps of fabric, I will take $25 for it, plus shipping, let me know if you interested or PM me.
John Bizal might have some or all of what your looking for also?

 

[Greensteel37]

Bruce,

Is the passenger back just a piece of plywood, or is it something else?

 

[M-37Bruce]

Passenger Seat Back

Hey John,
It is a steel frame w/springs, it hangs from the top on two hooks, then anchors w/ two bolts, 7/16th as I recall?


Top hook/hanger.


It's been a while, but I purchased the entire seat back, w/NOS canvas from Adirondack Dodge for 43 bucks.

 

[M-37Bruce]

There was a drivers seat shell & back spring listed in the latest issue of Supply Line? $ was a fair price too.

 

[jepsonjj]

Guner,

I just received my new canvas covers from Beechwood Canvas. While removing the old canvas from the passengers bottom seat, I discovered that the foam had turned to yellow dust. I called Beechwood, and they have the foam precut. The salesman, Dan, told me that they have foam for all 4 pieces if you dont want to use springs.

Good Luck,

Joe

 

[guner51]

could you give me the phone number and how much did he want for the m37 seat that was in supply line. I founf one up near Peru, IL. that has a good shell ,good bottom board,
and the back and bottom springs that are in real good shape, the canvas needs replaced.
hes asking $50.00 for it . Is that a good price?

 

[M-37Bruce]

Nice $

could you give me the phone number and how much did he want for the m37 seat that was in supply line. I found one up near Peru, IL. that has a good shell ,good bottom board,
and the back and bottom springs that are in real good shape, the canvas needs replaced.
hes asking $50.00 for it . Is that a good price?

I couldn't find the ad, but the norm used to be around 69 $'s for the shell only, so the board and shell for fiddy is a gud 'un!
Any springs included, if so that's a bonus?

 

[knattrass]

I bought a complete board and foam set from VPW that they had picked up overseas. They have sewn vinyl covers and I bought a new set of canvas covers from New Life. We ended up finding complete NOS seats with new covers. The VPW price was $100 and the canvas price from New Life was $150. I also have a passenger seat back frame sandblasted/primed but it does not have the Z brackets noted in above post. Send me a PM if interested. Keith